Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Burbank, CA
Garage door installation in Burbank runs $700 – $2,200 for a complete sectional door, and the job usually takes a full morning. Most Burbank homes we work on were built in the 1940s and 1950s, which means the opening sizes, trim clearances, and header framing rarely match today’s off-the-shelf doors. That’s the core of what we do at Ironside Garage Door Repair: measure carefully, order the right door, and install it square so it holds for decades in this climate. Call (855) 341-7752 for a free measure and written quote.
Why Burbank Homes Are Different
Burbank’s housing stock skews heavily toward postwar single-story ranch and Spanish-style homes, and thousands of those still have their original tilt-up wooden garage doors. In Magnolia Park and the Rancho Equestrian area, we regularly see single-car garages with 7-foot-wide openings that don’t match any modern standard width, so an installation here often means custom trimming, new jambs, or a conversion from tilt-up to sectional rather than a simple swap. The dry San Fernando Valley heat is rough on wood: doors warp, veneer delaminates, and the bottom rail rots where it meets the slab. Add occasional Santa Ana wind events that push hard against old track and spring systems, and you have a city where “just replace the door” almost always means more than unbolting the old panel and hanging a new one. We also see Rancho Equestrian garages that have been modified for tack rooms or hay storage, with reinforced hinges and raised tracks that call for a technician who has done this before. If your home is east of the 5 or near the studios off Olive Avenue, the house itself is probably part of that same 1940s – 1960s generation, and those opening quirks are common there too.
Styles & brands we work with
Our Main Burbank Services
Two services account for most of the calls we run across Burbank: full garage door repair and opener repair. Both need a technician who knows the brand of hardware on the door, not just the symptom.
Garage Door Repair in Burbank
When a Burbank garage door won’t lift, lifts crooked, or drops hard after a Santa Ana wind event, the usual culprits are broken springs, stretched cables, or a bent track from years of heat cycling and old hardware. Our technicians carry parts for the most common doors throughout 91505, 91506, 91507, and 91508, and we diagnose by brand rather than guessing. Doors in older Magnolia Park homes are often original Wayne Dalton or Craftsman setups, and the fix usually involves matching what’s there instead of telling you to replace everything. Get the full scope of repair work at Garage Door Repair in Burbank.
Garage Door Opener Repair in Burbank
Opener failures are no less common here, especially on the Chamberlain and LiftMaster units installed in tens of thousands of Burbank garages over the last two decades. We handle stripped gears, dead logic boards, burned-out capacitors, and door sensors knocked out of alignment by the same dry air that cracks door seals. The diagnostic process starts with the opener’s brand and model, because an Amarr door paired with an older opener behaves differently than a Raynor door on a newer one. See what we cover at Garage Door Opener Repair in Burbank.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Burbank
Garage door installation in Burbank means working around 1940s and 1950s openings that were built for tilt-up wood doors, not modern sectional panels. Most jobs in Magnolia Park and Rancho Equestrian need some combination of custom trim work, header reinforcement, or a conversion from one-piece tilt-up to a sectional door that actually seals. The dry heat here warps old wood doors to the point where replacement becomes cheaper than continued patching, and a properly installed new door also handles Santa Ana wind loads better. Ironside Garage Door Repair specializes in exactly this kind of install, and our team is fluent in Amarr, Wayne Dalton, Craftsman, and Raynor hardware, so the new door matches your existing track and opener where possible. For the full installation service line, see Garage Door Installation.
Garage Door Replacement
Signs you need it
A wooden tilt-up door with warped panels, a split bottom rail, or delaminating veneer that no longer closes square against the jamb is past its service life.
What it costs in Burbank
A complete garage door replacement in Burbank typically runs $700 – $2,200 depending on door size, material, and how much retrofit work the existing opening needs.
How we do it
We remove the old door and hardware, inspect and reinforce the header and jambs, true the opening, then hang and balance the new door on matching track.
Garage Door Installation Service
Signs you need it
You’re converting a single-car tilt-up to a sectional door, enclosing a carport, or finishing a new garage and need a door hung from scratch.
What it costs in Burbank
New garage door installation in Burbank runs $700 – $2,200, with older 91505 and 91506 homes often adding panel or trim work included in that range.
How we do it
We measure the rough opening, check for plumb and level, install new track and hardware, set the door, and tune spring tension until the door balances at half-open.
Commercial Garage Door Installation
Signs you need it
A roll-up or sectional door at a studio warehouse, shop, or ADU garage that’s hit the end of its track life or doesn’t clear stored equipment anymore.
What it costs in Burbank
Commercial garage door installation in Burbank falls in the $700 – $2,200 range for typical single-door openings, with heavier-gauge track and springs adding cost depending on door size.
How we do it
We assess the opening, door weight, and daily cycle count, then install the door and hardware rated for that duty cycle and anchor everything to code for the Burbank building district.
Garage Door Installation Contractors
Signs you need it
You’ve gotten three bids from general contractors and want a garage-door-only crew who installs doors every week rather than as a side line item on a remodel.
What it costs in Burbank
Hiring a dedicated garage door installation contractor in Burbank runs $700 – $2,200 for the standard single or double door, with the quote locked before any work starts.
How we do it
We run the full install ourselves, from removing the old door to final spring balance, so there’s no handoff between a generalist and a door company halfway through.
Garage Door Seal Installation
Signs you need it
A bottom seal cracked and crumbling from Burbank’s dry heat lets dust, leaves, and the occasional field mouse from the LA River wash into the garage.
What it costs in Burbank
Replacing the bottom seal or weatherstripping on a Burbank garage door runs $110 – $220 including the new seal and labor.
How we do it
We remove the old seal, clean the retainer channel, cut the new bulb or T-style seal to length, and seat it so the door closes tight to the slab.
What Garage Door Installation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| New sectional door (single) | $700 – $1,400 |
| New sectional door (double) | $1,200 – $2,200 |
| Retrofit trim / opening prep | $250 – $500 |
Does Burbank require a permit for garage door replacement?
For most single-family homes in Burbank, replacing an existing garage door with a door of the same size does not require a city permit. Adding or enlarging an opening, or converting a carport to an enclosed garage, falls under Burbank’s building code review and you’ll want to confirm requirements with the city’s Building Division before work begins.
How long does a garage door installation take in Burbank?
Most standard sectional installations in Burbank take three to five hours from tear-out to final balance. Older 91505 and 91506 homes that need header work or tilt-up-to-sectional conversion can stretch to a full day, and we’ll tell you the expected timeline at the free measure.
Brands We Service in Burbank
Our Burbank crew works on Amarr, Wayne Dalton, Craftsman, and Raynor doors regularly, and we stock common rollers, hinges, seals, and springs for those systems in the service vans. That means most repairs happen on the first visit rather than after another trip. See the full list at our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| Full garage door repair | $150 – $600 |
In Burbank, the thing that pushes a job toward the top of these ranges is almost always the age of the opening itself: a 1950s Magnolia Park garage with a non-standard width and dry-rotted jamb takes longer to fit and square than a standard modern opening. Whatever the number is, you get the full price in writing before we touch the door, and that price doesn’t change once the work starts.
Neighborhoods We Serve in Burbank
We run calls across all four Burbank ZIP codes and know the garage quirks of each part of town. Our response for most areas is the same business day, with the older sections of Burbank taking slightly longer only because of street parking and narrow driveways.
- Magnolia Park
- Rancho Equestrian
- Burbank Hillside District
- Chandler Park area
- McNeil neighborhood
Service Area – Cities Near Burbank
Our Burbank crew also covers the adjacent communities where the housing stock and garage door needs are similar. If you’re right over the city line, we work in Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA as well.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Burbank
We cover all four Burbank ZIP codes, 91505, 91506, 91507, and 91508, and most repair calls can be scheduled the same business day. Installation visits are scheduled around the free measure and door order time, since doors are cut to your opening. Call (855) 341-7752 to check today’s schedule.
Some Burbank HOAs and historic district overlays, especially in the hillside and equestrian areas, require design review before you can change a garage door style or color. We’ll tell you if the door you’re considering raises any of those flags, but approval goes through your HOA or the city’s planning desk, not through us.
No. We quote the job after looking at the door, the opening, and the surrounding framing in person. The number you approve before work starts is the number on the final invoice, full stop. If we find hidden damage behind the door frame, we stop, show you, and get your approval on any added work before proceeding.
If your garage door is giving you trouble in Burbank, or you’re ready to replace a warped tilt-up door with a sectional that actually fits, call Ironside Garage Door Repair at (855) 341-7752. We’ll measure, quote, and get it done. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— Gilbert Castillo"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Arjun Shah"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Darnell Hampton